Connect with us


Three-Cylinder Engines Finally Get Some Respect




Want a car that uses less fuel? How about cutting down on the number of cylinders in the engine? Better yet, why not start with four cylinders and take away one?

In theory, three-cylinder engines should have been a great solution to achieving high MPG decades ago but didn’t quite pan out so well in practice. It wasn’t because the technology was bad; rather, the problem was execution.

Three-cylinder cars of the 1980s, such as the Daihatsu Charade and the Geo Metro, were quite thrifty but unrefined, mainly because their engines weren’t balanced well in accordance to basic physics. That is, because two of the pistons move up and down in the cylinders simultaneously, a third-cylinder naturally makes things unbalanced.

A result of this poor balance is relatively low performance. Case in point, the 1.0-liter engine found in the Charade — a 2,000-pound compact hatchback that was sold in the United States from 1988 to 1992 — produced a mere 53 hp and required a full 15 seconds to accelerate the tiny car from 0 to 60 miles per hour. Perhaps its only redeeming feature? A respectable, EPA-estimated 38 MPG fuel economy rating in highway driving.

The Ford Fiesta SFE of today, by comparison, showcases how today’s technology has transformed the 3-cylinder engine into something to be respected. The laws of physics still cause a balance issue but engineers have created workarounds.


The Fiesta SFE’s engine is the same size as the old Charade’s 1.0-liter but it is rated at a notably more impressive 123 hp, over twice that of the Charade. Its EPA rating is also approximately 3 mph higher at 41 mpg in highway driving.

Wade Jackson, the Fiesta’s brand manager, says no promotions are currently planned to point out that the Fiesta has a three-cylinder engine. Instead, the focus is on gas mileage. With the Mitsubishi Mirage, another small hatchback with a frugal 3-cylinder engine, Mitsubishi’s focus was quite economic: providing an affordable entry-level car that offers the fuel economy of a hybrid or diesel, but at a lower price.

The engineering goal of both the Fiesta and Mirage was to cut down the vehicle’s overall curb weight to enable the engine to deliver good performance. The Mirage, in particular, weighs just 1,863 pounds and can reach 60 mph from a standstill in about 11 seconds.

Auto manufacturers are increasingly turning to threes for several of reasons:

Smaller engines reduce a car’s overall weight, improving handling and braking.

  1. Three-cylinder engines use about 20 fewer parts than four-cylinders and are, thus, less expensive to build.
  2. The engines are very compact, helping improve safety in front-end crashes (the chances of it crashing into the interior in a severe high-speed accident are reduced).
  3. They deliver diesel-like levels of fuel economy for a much lower cost.

Did you know that the sexy, highly-capable BMW i8 hybrid sports car is partly powered by a three-cylinder engine?

What’s not yet known is how drivers will accept the modern three-cylinder. Ford, BMW and other auto manufacturers are not drawing attention to the number of cylinders due in part to the of older 3-cylinder engines. Instead, the Sales Manager at . tell us that the message of automakers focuses on performance and fuel economy.

Continue Reading
Click to comment


6 Things To Consider When Buying A Used Car Engine Online



Jeep-M715 Five Quarter Moster Truck, V8 engine

Buying just an engine is a different experience than buying a whole car.

People buy used automotive engines for a range of reasons. Some want to modify their vehicles over time, while others need to replace an old, failed engine. Why might you be looking for one?

Buying a used engine online is less expensive than buying a new one, but to avoid wasting money, you’ll need to ensure that your purchase is in good condition. In this article, we cover six important things to consider when buying a used engine.

1. Making The Right Choice

Not all engines are built the same, and before making an online purchase from , you’ll need to be sure that you’re buying the right engine for your car or truck. Though models from the same manufacturer and within a few years of one another may have some degree of crossover, this isn’t always the case. To avoid unnecessary expense and frustration, check to see which engine your vehicle needs.

2. Is It A Short Or Long Block?

Next, you’ll need to determine whether you need a . A long block engine comes with all the necessary components, while a short block engine is designed for situations where a full replacement isn’t required. Your installer should be able to tell you which engine option is best for the application.

3. Check The Engine’s Service History

It’s always advisable to get someone to inspect the engine before buying it. However, with online sales, that’s not always possible. Here, you’d ask the vendor to provide the engine’s full service history. When it arrives, ask your installer to look for signs of excessive wear and tear, as they may point to hidden problems.

4. Is It A Salvaged Or A Rebuilt Engine?

When buying a used automotive engine online, you may end up with a rebuilt or salvaged unit. A salvaged engine is one that’s been removed from a car that’s been scrapped because of heavy damage or age. On the other hand, a rebuilt engine has been and inspected by skilled technicians. However, with rebuilt engines, it’s important to choose a reputable vendor.

5. Low-Mileage Units

It seems elementary, but many buyers overlook an engine’s mileage. Those with fewer miles typically have less wear and tear just because they haven’t been used as much. If the engine is coming from an intact vehicle rather than a shelf, ask for a vehicle history report to ensure accurate mileage.

6. A Good Warranty

When buying a used engine online, check to see if an extended warranty is available. While reputable vendors sell high-quality products that provide years of reliable service, an extended coverage period will give you peace of mind and protection from future problems.

Keep That Used Automotive Engine Running Smoothly (And Stay on the Road)

No matter where you’re buying a used engine, it’s good to have a trusted mechanic inspect it. Not only will they ensure that you’ve made a good choice, but they can install the engine as well. Whether you’re buying online or in person, it’s crucial to buy from a reputable supplier. After all, you don’t want to invest in an engine only to find that it doesn’t work, or it’s not the right fit! We hope these tips have made you feel confident about searching for and purchasing a used engine online.

Continue Reading


5 Good Things To Do Before Selling Your Car



Toy Car On Cash Money


Your can get a lot more money for your car than you probably think…

We all know that selling a car is not easy. Getting everything  ready and having to negotiate a selling price to prospective buyers can test anyone’s nerves and patience, but if you want to sell your car for a high price, you need to put in the necessary work.

Understanding the factors and practices that affect the value of your car will put you in a better position to walk away with as much money as possible. Start off with these ones…

1. Good Mileage

Mileage strongly correlates with wear and tear and is probably the most important factor  impacting the value of a used car. If you’re planning to sell your car soon, keep your eye on the odometer and sell before hitting significant mileage points, especially those involving the expiry of a warranty.

All other factors equal, a car with mileage greater than 100,000 miles will fetch less money than one with 50,000 miles or lower, when the extended warranty is probably still in effect.

Americans drive their car an average 12000 to 15000 miles every year. To keep your mileage low, consider renting a car or taking public transit whenever going on long trips.

2. Good Condition

Take good care of your car, and it will take good care of you, especially when it comes time to sell. Regular maintenance checks will help keep your car in optimal condition and make it more enticing to prospective buyers.

When you do take your car to a shop for a repair or routine maintenance, make sure to 


save all records of the service rendered. Doing so will not only allow repairs to be done in a timely manner and even prevent problems all together, but the proof of your tender love and care they provide will make the car more attractive for resale.

Even if you think your car is at the end of its useful life and no longer safe for the road, you can still get a decent amount of money by selling it to a vehicle removal  company like . These companies dismantle vehicles for spare parts.

3. Good Photos

Whether you’re trying to sell your car online or you’re placing a classified ad in the newspaper,  a picture can say 1,000 words. In fact, listings of cars with photos get noticed a lot more and give potential buyers a better idea of the kind of car being offered.

But before you take out your camera and start shooting, make sure your vehicle is in tip-top shape inside and out. Clean the exterior, interior and trunk of all junk and remove any bumper stickers or personal touches you’ve added during your ownership.

Next, find a good setting. You want the car you’re selling to be the focal point of the photos, so make sure there are no distracting clutter like other cars in the driveway.

Finally, you want to show your car in the best light possible… literally. The best time to take the photos is in the early morning or late evening, when the sun is low and provides a warm glow that’s free from harsh shadows and bright glare.

4. Good Ad

Creating “For Sale” signs or an ad online is your chance to show how eager you are to sell the car, so think about what you are communicating. Besides the price, the ad should also include the car;s model year, make, model and trim level, as well as the mileage, color, condition and popular options.

Make sure to indicate a sense of urgency if appropriate and if you’re open to negotiating the price. Include the top notch photos of the car you took earlier.

5. Good Organization

Making sure everything is in order beforehand will expedite the selling process. Having proper, well-organized documentation ready and providing an accurate car history report will make it easier to assure prospective buyers that your car is in good shape.

Continue Reading


5 Signs You Need To Change And Replace Your Car Tyres



Jeep-M715 Five Quarter Moster Truck, 40-inch tires

Why would you want to risk your life driving with bad tyres?

To perform adequately and provide grip in a variety of situations, car tyres need regular maintenance. Although most of us know that it’s important to service our tyres, few know just how often it needs to be done.

We encourage safe driving at all times, so in this article, you will learn a few big signs that it’s time to replace your tyres.

1. Low Tread Depth

What constitutes a worn-out tyre? If there’s 2/32” of tread depth (or less), it’s a good idea to come to to switch them for a new set. Of course, if the car’s tyres wear out faster because of poor weather or road conditions, it’s good to change them before they become that worn.

2. Cracking

The elements play a crucial role in tyres’ overall condition. Tough conditions such as road grit, acid rain, UV rays, and temperature shifts gradually erode rubber, causing cracks. Though tyres are infused with anti-aging ingredients, the protection doesn’t last forever. Superficial cracks aren’t a real problem, but when they are deep in the rubber, it’s time to change your tyres.

3. Bubbles, Bulges, and Blisters

When car tyres develop bubbles and bulges, it’s indicative of a serious issue. Bubbles often come after a hard impact that damages a tyre’s inner lining, but in some cases, they appear for no reason at all. No matter the reason for a bulge or , when they arise, replace the tyres as soon as possible.

4. Excessive Vibration

You might have experienced vibration when driving after having your tyres rotated or replaced. No matter how fast (or slow) you’re driving, it’s important not to ignore vibrations when they occur. Vibrations can typically be sensed through the wheel or the car’s front end, and they’re quite common after tyre service. However, if it doesn’t go away with time, bring your vehicle in for an inspection. A technician may look at various factors, such as lug nut tightness and the presence of balancing weights, before making a repair recommendation.

5. Season and Age

Different tyre parts are made of varying materials, which makes it doubly important to pay attention to the age of your tyres. As tyres get older, the tread may become separated from the rest of the tyre, resulting in reduced traction. Prolonged heat exposure, vehicle storage methods, and the way a car is used will all affect tyres’ longevity and quality.
Though your tyres may still look good and have plenty of grip, you may still need to change them regularly if you’re in an area with seasonal climate variations. This usually means having two sets of tyres: those that work better during the dry season and those that are specially made for peak performance in snow and rain.

Storing a vehicle in a garage will protect its tyres from elemental exposure. It’s worth remembering that not all car tyres are made to last the same number of miles, but with regular rotations and servicing, you can maximize your tyres’ lifespan by enabling even .

Don’t Delay — Check Your Tyres Today!

Though your car’s tyres are purpose-built to provide thousands of miles of worry-free service, they don’t last forever. While certain steps, such as regular rotations and frequent inspections, will help your tyres last longer, all tyres eventually need to be replaced. By looking for the above signs of tyre wear, you’ll know when to replace those tyres—and when it can wait.

Continue Reading
Наш интересный web-сайт , он описывает в статьях про
майнер купить

Copyright © 2019 FbaPPs